- Suitable For: Bonding wood to a wide range of substrates including all types of timber
- Area of use: INT & EXT
- Time to full cure: 5 minutes
- Volume: 300ml, 1kg
- Container Type: bottle
- Type: adhesive
- Colour: Brown
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 6
Brown
AlphaChem from Cromar, presents a high quality, solvent-free, Polyurethane Wood Adhesive, suitable for a wide range of internal and external applications where a rapid cure rate is required.
Fully waterproof to EN 204 D4 with excellent weathering and ageing properties, and is also resistant to chemicals and temperatures within the range of -30 to +100°C.
For professional use only.
For more information on Cromar, please visit their website here.
For application guns, click here. or for more sealants, please click here.
Polyurethane Wood Adhesive is ideal for:
– Bonding wood to a wide range of substrates, including all types of timber (even engineered timber, laminates & most metals).
– Wood jointing in construction and manufacturing.
– Gap filling on uneven or imperfect joints.
APPLICATION
– Ensure surfaces to be bonded are clean, sound, dry and free from dust, grease or other contaminants which could harm the bonding process. If the substrates need to be cleaned, use methylethylketone (MEK) or acetone. Make sure to check their compatibility with the substrates first. – Cut the thread and then the nozzle to the required size and apply with a sealant gun, wearing gloves.
– Dampen substrates before application (take care not to over-wet). Apply the adhesive to one surface only.
– Assemble the substrates and place even pressure within 5 minutes of adhesive application. Clamp until the adhesive is sufficiently cured to permit handling the bonded item (approximately 5 minutes).
– Uncured material can be cleaned off with Alpha Chem Grafters All Trades Wipes. After curing has taken place, carefully use a sharp knife to trim back excess material.
LIMITATIONS
– One of the substrates to be bonded must be porous/ permeable.
– It is the user’s responsibility to ensure suitability for use.
– Read the label prior to use as it contains essential health and safety information. Further information can be found on the Safety Data Sheet available on request.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £51.83 inc. VAT
£43.19 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.