- Suitable For: The sealing of refrigeration units and areas where contact with food is likely
- Area of use: preferably INT
- Application Method: silicone gun
- Time to full cure: 48 hours
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 2 colours
- Brand: Dowsil
- Manufactuer: Dowsil
DOWSIL 786 is one part, flexible; fast curing silicone rubber sealant specifically designed for the sealing of refrigeration units and areas where contact with food is likely. Therefore making it ideal for food
For more information, head over to the Dowsil website.
For application guns, click here, and for a wider range of colours, why not try the Forever White range.
This item is currently experiencing a 4-5 week lead time
DOWSIL 786 Silicone Sealant is designed to seal nonporous surfaces around showers, tubs, sinks and plumbing fixtures where conditions of high humidity and temperature extremes exist.
Typical applications include:
• Sealing around shower-tub enclosures, tubs, sinks, urinals and whirlpools
• Sealing around bathroom fixtures
• Waterproofing rimless sinks
• Ceramic tile grouting
APPLICATION
Surface Preparation
Ensure that surfaces to be sealed are clean, dry, sound and grease-free. Clean with DOWSIL R40 Universal Cleaner or methylated spirits depending on the substrates to be sealed, and dry thoroughly with a clean, lint-free cloth before application of sealant.
Note: When using any solvent, always provide adequate ventilation. Avoid heat, sparks and open flames. Observe and follow all precautions listed on the solvent container label. Above all, it is recommended that DOWSIL 786 is not applied to surfaces that are below 5°C.
Masking
Areas adjacent to the joints should be masked with tape to prevent contamination of the substrates and to ensure a neat sealant line. After that, masking tape should be removed immediately after tooling.
Priming
Primer is not required on most common nonporous substrates, including vitreous enamel, ceramics, porcelain, glazed tiles, etc. However, for some metals and plastics, priming is required. For more information, please refer to the technical data sheet attached or contact Dow Corning.
Back-Up Materials
Where back-up material is required closed cell polyethene backer rod is recommended. Low tack polyethene tape should be used in joints too shallow to allow the use of the backer rod.
Finishing
The joint should be tooled within 5 minutes of application to ensure good contact between the sealant and the substrate. Tooling of the sealant also gives a smooth, professional finish.
Clean-Up
The excess sealant may be cleaned off tools and non-porous surfaces while in an uncured state using DOWSIL R40 Universal Cleaner. The cured sealant may be removed with the aid of
DOWSIL Silicone Sealant Remover, abrasion or other mechanical means. However, care should be taken not to damage plastic surfaces.
LIMITATIONS
DOWSIL 786 Silicone Sealant is not recommended for use in applications involving:
• Structural silicone glazing
• Floor joints where physical abuse or abrasion is likely to be encountered
• Prolonged water immersion
• Cementous surfaces, such as masonry
• Building materials that might bleed oils or solvents – materials such as impregnated
wood, partially vulcanized rubber gaskets or tapes or adhesives
• Totally confined spaces, because the sealant requires atmospheric moisture for cure
• Surfaces sensitive to corrosion by acetic acid vapors (a byproduct of sealant cure)
• A surface that is intended to be painted
1 review for Dowsil 786 Food Safe Silicone Sealant 310ml
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
DARREN (verified owner) –
Great company to deal with