- Product ID: FLEX
- Suitable For: For use around ceiling cornices, skirting boards, windows and door frames, stair treads and risings and fixtures adjoining walls.
- Area of use: INT
- Volume: 200ml
- Container Type: tube
- Type: filler
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 12
Everbuild Easi Squeeze Decorators Flexible Filler is a filler that can be overpainted with all paint types, or covered over with wallpaper. After that, no sanding down is required.
Advantages
– Fast drying – Everbuild Easi Squeeze can be overpainted in 1 hour.
– Permanently flexible.
– Easy water clean up.
– Excellent slump resistance.
For all paintable products on our website, please click here.
For more information on all other Everbuild products, please visit their website here.
– Sealing and filling gaps & cracks before decorating.
– For use around ceiling cornices, skirting boards, windows and door frames, stair treads and risings and fixtures adjoining walls.
– Can be used to fill damage plaster.
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be free of dust and dry. Highly porous substrates such as new plaster should first be primed with a dilution of filler with water at a ratio of 1:2. Can be applied to slightly damp surfaces.
APPLICATION
Cut the tip of the cartridge with a sharp blade to ensure not to damage the thread. Apply nozzle and cut cleanly with a sharp blade at an angle, with an opening slightly larger than the gap to be sealed. Squeeze tube from the bottom to ensure you get all the contents out.
Care should be taken not to saturate the surface as this will delay drying. Any excess sealant can be removed using a sponge and warm water. Can be overpainted after 1 hour.
LIMITATIONS
– Not for use in conjunction with bitumen or asphalt.
– Do not attempt to abrade when cured.
– Do not paint over until a surface skin has formed.
Note: this product is flexible. Certain inferior quality paints (especially certain vinyl matts) have a minimal movement in the dry film. The dry paint film can crack if the movement is excessive.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.