Everbuild Galva Mate Sealant 295ml
£2.75 inc. VAT
£2.29 ex. VAT
- Product ID: 489540
- Suitable For: sealing high-velocity ducting
- Area of use: INT
- Application Method: silicone gun
- Time to full cure: 3-5 days
- Volume: 295ml
- Container Type: cartridge
- Type: adhesive
- Colour: grey
- Brand: Everbuild
- Manufactuer: Sika
- Box Size: 1
Data Sheets
Galva Mate is ideal for sealing high-velocity ducting as well as ventilation grills, joints, and related components, ensuring airtight performance and durability.
Substrate Preparation
Ensure all surfaces are clean and free from dust. Remove any loose or flaking coatings, as well as old sealant and mastic joints, before application. The product can be applied to damp surfaces but should not be used on wet surfaces.
Application Method / Tools
When assembling ducting joints, follow the guidelines outlined by the Heating and Ventilation Contractors Association. Cut the cartridge tip carefully without damaging the thread, attach the nozzle, and trim it at a 45° angle to create an opening slightly larger than the gap to be sealed. Use a standard sealant gun, maintaining even pressure on the trigger and holding the gun at a consistent angle. Smooth the sealant within 20 minutes of application using a wetted spatula, piece of wood, or gloved finger, avoiding over-saturation of the surface to prevent delays in drying. Excess sealant can be removed with a sponge and warm water. Note that slight shrinkage occurs during curing, so overfill the joint slightly if a flush finish is desired.
Limitations
- Suitable for internal use only.
- Not recommended for areas with high abrasion or below-ground applications.
- Avoid use on surfaces that bleed oils or plasticizers.
- Do not apply in contact with bitumen or asphalt.
- Cold or damp conditions may extend the curing time.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.