- Suitable For: oversealning or repairing joints
- Area of use: INT & EXT
- Volume: 10m x 100mm x 1.5mm 10m x 150mm x 1.5mm 10m x 200mm x 1.5mm
- Type: seapling tape
- Colour: 2 colours
- Brand: Hodgson Sealants
- Manufactuer: Hodgson Sealants
Data Sheets
Hodgson Sealants Foilband is a preformed strip sealant made from synthetic rubber and affixed with a secure foil backing.
Key Features
- Excellent adherence to a diverse array of substrates.
- This product demonstrates exceptional conformability.
- The foil exhibits impressive resistance to tearing and puncturing.
- Maintains flexibility throughout its operational lifespan.
- Shows good resistance to UV exposure.
- Simple and precise application with minimal wastage and mess.
For more in our range of sealants, please click here. For application guns and tool, please click here.
For more information on Hodgson Sealants and their other products, you can visit their website here.
Hodgson Sealants Foilband is:
- Suitable for application as a flashing tape, commonly used in conservatory construction.
- Effective for sealing, over-sealing, or repairing joints in gutters and downpipes.
- Ideal for sealing over T-bars in glazing and conservatories.
- Well-suited for temporary remedial tasks, including the sealing of leaking components.
APPLICATION
Surface Preparation: Prior to application, ensure all surfaces are clean, dry, and devoid of frost, grease, and loose materials. For contaminated substrates, Hodgson recommends the use of propan-2-ol (IPA) for cleaning, allowing it to dry before applying the sealant strip. When applying the tape on porous or friable surfaces, it’s advised to treat the surface with an appropriate primer, such as an exterior-grade PVA, to seal and stabilize it.
Application: To prevent creasing of the foil, separate the foil and sealant from the backing paper while unwinding them from the roll. After application, use a roller to secure good adhesion to the substrate. Minimize seams in the flashing where possible. In cases where joints are necessary, they should overlap by a minimum of 120mm, with the uppermost piece overlapping on top of the lower strip, enabling water to run freely over the front surface of the flashing. When applying the tape on textured surfaces like pebble dash or rough brick, it’s recommended to apply a bead of Silfix® U9 Low Modulus Silicone on the top edge of the foil to prevent water from penetrating behind the strip.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.