Mapei Keraflex Maxi S1 20kg
- Suitable For: bonding ceramic tiles and stone materials
- Area of use: INT & EXT
- Application Method: trowel
- Volume: 20KG
- Container Type: bag
- Type: adhesive
- Colour: 2 colours
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Keraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features:
Key Points:
- Excellent adhesion with no vertical slip, ideal for large or heavy tiles on vertical surfaces.
- Adaptability to irregular substrates and tile surfaces.
- Minimal shrinkage and consistent hardening, even when applied thickly.
- Extended open time and adjustability for enhanced installation flexibility.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. For more in our range of adhesives, click here.
Keraflex Maxi S1 is ideal for bonding ceramic tiles and stone materials on uneven substrates, both indoors and outdoors, with up to a 15 mm bed depth, eliminating the need for pre-leveling. It is also suitable for spot bonding insulation materials, including expanded polystyrene, rock wool, glass wool, Eraclit® wood-cement panels, sound-deadening panels, and cork. Some applications include:
- Bonding ceramic and moisture-resistant stone tiles on various surfaces like cementitious screeds, underfloor heating, cementitious or lime-based renders, firmly fixed gypsum board, and screw-fixed timber.
- Tiling over existing floors (ceramic, marble, etc.) for interior and exterior applications.
- Installing floors that will be subjected to heavy traffic.
- Bonding floor and wall coverings on Mapelastic waterproofed substrates.
- Bonding tiles or strips with pronounced ribs or lugs, including porcelain, klinker, single-fired tiles, and terracotta.
Preparing the Substrate
Before applying Keraflex Maxi S1, ensure all substrates are cured, structurally sound, clean, crack-free, and free of loose particles, oil, grease, wax, and dust, and that they are sufficiently dry. Cementitious substrates should be cured to avoid shrinkage after tile installation. During warmer months, renders should cure for at least two weeks per centimeter of thickness, while cementitious screeds need a minimum of three weeks, unless specific MAPEI screeds (Mapecem, Mapecem Pronto, Topcem, or Topcem Pronto) are used. Cool down sun-exposed surfaces by dampening with water. Gypsum substrates and anhydrite screeds should be dry, firm, and dust-free and require a primer, such as Eco Prim T or Mapeprim SP.
Preparing the Mix
Mix Keraflex Maxi S1 with clean water to create a smooth, lump-free paste, allowing it to rest for about five minutes before re-stirring. For the white mix, use 5.2-5.6 liters of water per 20 kg of powder, and for the grey, 5.0-5.4 liters. When prepared correctly, the mix has a pot life of approximately 8 hours.
Applying the Mix
Use a notched trowel to apply Keraflex Maxi S1 to the substrate, selecting a trowel size that ensures full tile back coverage. Start by spreading a thin layer with the trowel’s straight edge, followed by the required thickness with the notched side. For large tiles (over 300×300 mm), outdoor tiling, high-load floors, or submerged installations like pools, use the back-buttering technique to achieve complete coverage.
Installing the Tiles
There’s no need to wet tiles before installation; only dust-heavy tiles may be briefly dipped in clean water, then dried. Press tiles firmly to ensure good adhesive contact. Keraflex Maxi S1 has an open time of about 30 minutes under normal conditions, but this can decrease in direct sun, wind, or heat. Regularly check that no skin forms on the adhesive; if it does, re-spread without adding water. Tiles can be adjusted within 60 minutes of installation. Protect the tiled area from rain for at least 24 hours and from frost or strong sun for 5-7 days.
Spot-Bonding Insulating Materials
For spot-bonding soundproofing or insulation panels, apply Keraflex Maxi S1 with a trowel or float, adjusting the thickness based on surface level and panel weight.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.