Mapei Mapetherm Net – 50m x 1m Roll
£75.60 inc. VAT
£63.00 ex. VAT
- Product ID: 7342550
- Suitable For: reinforcing skim coats and repairing facades in the mapetherm systems
- Area of use: INT & EXT
- Volume: 50m x 1m roll
- Type: reinforcement ne
- Colour: white
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Data Sheets
Mapetherm Net is an alkali-resistant glass fibre mesh, suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems and Mapewall GPR.
Mapetherm Net is for use on top of render base coats as a reinforcement. The Silancolor Base Coat & Silancolor Tonachino Top Coat can be applied on top.
The mesh is made from glass fibres treated with a special primer which makes it resistant to alkalis and improves its adhesion to all MAPEI renders (where used). Once the reinforcing coat has hardened, the Net reinforces the layer to prevent cracks forming due to movements in the substrate or hygrometric shrinkage. It also makes it easier to apply an even reinforcing coat around 2-3mm thick, and increases its strength and resistance to temperature variations and abrasion.
Each roll is 50 metres long by 1 metre wide.
For relevant products which work with the Mapetherm Net system, please see Mapewall GPR and Mapetherm AR1 GG.
For more in our complete render systems, please click here.
Alternatively, you can visit Mapei’s website for more information by clicking here.
Mapetherm Net is a reinforcement mesh for:
a) protective reinforcing coats on façades and render with micro-cracks or crazing;
b) reinforcing coats on thermal insulation systems made with Mapetherm AR1, Mapetherm AR1 GG, Mapetherm AR1 Light, Mapewall GPR, Mapetherm AR1 Maxi or Mapetherm Flex RP.
Mapetherm Net must be completely embedded in the skim coat as follows:
· trowel-apply a layer of reinforcing compound according to the thickness permitted by the trowel;
· while the reinforcing compound is still fresh, lay Mapetherm Net on the surface and press it gently with the trowel so that it is embedded;
· wait for the reinforcing compound to dry (usually 12 to 24 hours depending on the type of product used, the thickness applied, the surrounding temperature and level of humidity), apply a second layer of reinforcing compound around 1-2 mm thick and, if necessary, finish the surface with a damp sponge.
When applying Mapetherm Net, make sure the edges of each piece overlap by at least 10 cm to form a seamless layer of reinforcement.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
From: £4.28 inc. VAT
£3.57 ex. VATAlphaChem Accelerator, Frostproofer & Hardener is a heat‐generating accelerator for cement-based mixes. Its principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures. AlphaChem Accelerator, Frostproofer & Hardener is based on calcium chloride and surfactants and is therefore not suitable for use in structures that are reinforced with steel. Neither should it be used in mortar in contact withSelect options This product has multiple variants. The options may be chosen on the product page -
From: £4.46 inc. VAT
£3.72 ex. VATAlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable. It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars. It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐ - Semi‐dry mixes. - Internal and external rendering. - Special finishes. - Pebbledash and Harling - Rough Cast. - Stucco etc. DOSAGE - 1 litre per 50‐100kg cement.Select options This product has multiple variants. The options may be chosen on the product page -
£96.59 inc. VAT
£80.49 ex. VATFosroc Colpor 200PF is a two-part polyurethane sealant that is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Fosroc Colpor is resistant to oil and hydraulic fluid spillage. It will not harden in cold weather nor become excessively soft or pick up in hot conditions. Furthermore, Colpor 200PF has high durability and long service life which reduces maintenance costs. Sold per unit - two parts to a unit "Box of 2". ADVANTAGES - Cold applied - no heating required - F -
From: £3.68 inc. VAT
£3.07 ex. VAT
From: £3.68 inc. VAT
£3.07 ex. VATGripbond Pro is a high quality, one part, HM sealing and bonding material, established on advanced hybrid polymer technology. A neutral “hybrid” sealant for use in areas demanding a tough elastic rubber joint or as an adhesive with strong bonding properties. For application guns to use with this product, click here. For all other Bond-it products, please click here. For any further information you may need on Bond-it, please visit their website here.Select options This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.