Mapei UltraCare Keranet
- Suitable For: removing cementitious residues that may remain on the surface after grouting
- Area of use: INT & EXT
- Volume: 750ml spray 5L
- Container Type: bottle
- Type: cleaner
- Colour: transparent
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Mapei UltraCare Keranet is a concentrated acid cleaner suitable for use on porcelain, ceramic and all acid resistant surfaces. It’s very effective at removing cementitious residues that may remain on the surface after grouting.
It is a buffered acid solution that does not emit fumes, making it safe for both the applicator and the environment.
UltraCare Keranet is a liquid cleaner that can be diluted in water according to the amount of dirt and residue to be removed. Dilute 1: 10 or 1: 5 parts by weight, i.e. 1 part of UltraCare Keranet with 5-10 parts of water. It may also be used undiluted to remove engobbio from porcelain and ceramic material. It is based on a special inorganic acid, with a buffered formulation, whose advantage is to have an aggressiveness towards stains and efflorescences equal to that of much stronger acids (muriatic/chloridian, sulfuric, etc.), without developing, like the latter, very dangerous toxic fumes. In any case, using the product in well-ventilated areas is recommended.
When properly used, it does not damage the grout joint even when coloured grouts are used, but rather removes the efflorescence that can sometimes form on their surface.
ADVANTAGES:
- Indoor, outdoor, walls and floors
- High performance
- Contact Time (5 minutes)
- Rotating cleaning machine
- Highly effective at removing cementitious grout residues and installation dirt
- Dilution with water can be altered according to the level of contamination to be removed (approximately 1:5 – 1:10 – 1 part of ULTRACARE KERANET with 5, 10 parts of water)
- Suitable for use on all acid resistant material
- Suitable for wet vac use
For more in our range from Mapei, please click here, or for our full range of cleaning and prep products, click here.
Alternatively, for more information on Mapei, you can visit their website here.
Mapei UltraCare Keranet is suitable for use on acid-resistant materials such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone and easily removes installation, cementitious grout and adhesive residues from the installed material leaving a perfectly clean surface. It can also remove limescale, rust stains and efflorescence.
APPLICATION
Make sure before use that the surfaces to be cleaned are acid resistant. It is advisable, in doubtful cases, to carry out preliminary tests. Before cleaning with UltraCare Keranet protect everything that can be damaged by splashes. The surfaces to be cleaned, especially if very absorbent (Tuscan terracotta, porous ceramics, natural stone etc.) must be well moistened with water before treatment with UltraCare Keranet.
Apply the product, diluted in water according to the level of residue on the surface (1: 10 or 1: 5) and the type of surface to be treated, working in manageable areas and leave to act
for about 5 minutes. Then work over the surface with a single disc cleaning machine or an emulsifying pad. Remove the solution and then rinse with plenty of clean water. For heavy residues you may need to repeat the above procedure.
Only use Keranet on completely cured grout (from 1 to 10 days depending on the type of cement grouting used). In case you need to use a grout residue remover at the point of installation, then we advise that you use UltraCare Keranet Easy, which is suitable for excess grout removal from the surface, at the point of application. Please refer to the specific data sheet.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£99.96 inc. VAT
£83.30 ex. VATFOSROC MS2 is a superior two-part priming system used in conjunction with Fosroc Nitoseal sealant range. FOSROC MS2 Nitoseal primer is formulated for priming prior to application of the sealant. For all other FOSROC products available on our website, please click here. For any further information you require or need on FOSROC, please visit their website here. -
From: £8.64 inc. VAT
£7.20 ex. VATMapei UltraCare Fuga is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application. During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn't have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, orSelect options This product has multiple variants. The options may be chosen on the product page -
£6.71 inc. VAT
£5.59 ex. VATEverbuild Everflex Silicone Eater is specifically designed to remove all silicone based sealants and surface water repellents - cured and uncured. The product acts by denaturing silicone polymers, making them easily water or solvent cleanable. Advantages - Readily denatures silicone. - May be used vertically as well as horizontally. - Water clean-up. For all other cleaners on our website, please click here. For tools, please click here. For any further information on Everbuild's products, please visit their website here. -
£20.40 inc. VAT
£17.00 ex. VATSoudal Primer 100 is a universal primer for use prior to applying polyurethane sealant to porous surfaces. CHARACTERISTICS - Liquid, easy application - Suitable for all professional sealants based on polyurethane, polysulfide and MS-polymers. Product Benefits: - Liquid primer for porous substrates - Universal Primer - Can be used with both Polyurethanes and Hybrid Polymers - One Component - Easy to use - Clear Solution For all other primers on our website, please click here. For our full Soudal range, please click here. For any further informat
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.