Mapesil LM – Box of 12
- Suitable For: sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz.
- Area of use: EXT
- Application Method: silicone gun
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 10 colours
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 12
Features & Benefits
WHERE TO USE
Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface.
The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood.
It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement.
Performs well in treated water typically found in swimming pools.
Thanks to the elasticity of Mapesil LM, it is suitable for a number of sealing applications, such as:
– pre-fabricated panels;
– window/door fittings and wall surrounds;
– pipe-work and vertical walls;
– similar and/or different types of coating materials.
It is also suitable for sealing joints in floors with limited
pedestrian traffic.
TECHNICAL CHARACTERISTICS
Mapesil LM is a solvent-free, one-component, neutral-cure silicone sealant which does not emit unpleasant odours, available in the form of a thixotropic paste. The product will remain flexible from a temperature range of between -40°C and +150°C. Mapesil LM delays the formation of surface mould. Mapesil LM offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand.
Mapesil LM bonds perfectly to most types of substrate used in the building industry without applying a primer beforehand (glass, ceramic, marble, aluminium, zinc-plated sheet metal, concrete, stainless steel and PVC).
If in doubt, please contact the MAPEI Technical Services Department or carry out preliminary tests beforehand. Mapesil LM is suitable for substrates sensitive to acids, whereas conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate.
RECOMMENDATIONS
• Do not apply Mapesil LM on heavily-plasticised plastics, rubber or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond
• Do not use for sealing floors subject to intense traffic (use Mapeflex PU45, Mapeflex PU20 or Mapeflex PU21).
• When using on marble, do not use Primer FD
CURING
When Mapesil LM is exposed to the air, the surrounding humidity sets off the cure reaction and the sealant becomes flexible.
The surrounding temperature only has a small impact on the cure rate of Mapesil LM, while the level of humidity in the surrounding air has the most influence.
STORAGE
You are able to store cartridges for up to 18months in a dry, cool environment.
SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
Please use gloves, eyes protection and to take the usual precaution for the handling of chemical products. For further information, please refer to the latest version of our Material Safety Data
Sheet.
PRODUCT FOR PROFESSIONAL USE.
For all other Mapei products on our website, please click here.
For any further information on Mapei products, please visit their website here.
Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface.
The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood.
It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement.
Performs well in treated water typically found in swimming pools.
TECHNICAL CHARACTERISTICS
Mapesil LM is a solvent-free, one-component, neutral-cure silicone sealant which does not emit unpleasant odours, available in the form of a thixotropic paste. The product will remain flexible from a temperature range of between -40°C and +150°C. Mapesil LM delays the formation of surface mould. Mapesil LM offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand.
Mapesil LM bonds perfectly to most types of substrate used in the building industry without applying a primer beforehand (glass, ceramic, marble, aluminium, zinc-plated sheet metal, concrete, stainless steel and PVC).
If in doubt, please contact the MAPEI Technical Services Department or carry out preliminary tests beforehand. Mapesil LM is suitable for substrates sensitive to acids, whereas conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate.
For optimum application, use with a PC Cox Easiflow Skeleton Mastic Applicator Gun, and finish with the Bond It Professional 4 Part Sealant Applicator Tool Kit for a smooth neat finish.
For all other Mapei products on our website, please click here.
For any further information on Mapei products, please visit their website here.
Thanks to elasticity of Mapesil LM, it is suitable for a number of sealing applications, such as:
– pre-fabricated panels;
– window/door fittings and wall surrounds;
– pipe-work and vertical walls;
– similar and/or different types of coating materials.
It is also suitable for sealing joints in floors with limited pedestrian traffic.
CURING
When Mapesil LM is exposed to the air, the surrounding humidity sets off the cure reaction and the sealant becomes flexible.
The surrounding temperature only has a small impact on the cure rate of Mapesil LM, while the level of humidity in the surrounding air has the most influence.
STORAGE
You are able to store cartridges for up to 18months in a dry, cool environment.
RECOMMENDATIONS
• Do not apply Mapesil LM on heavily-plasticised plastics, rubber or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond
• Do not use for sealing floors subject to intense traffic (use Mapeflex PU45, Mapeflex PU20 or Mapeflex PU21).
• When using on marble, do not use Primer FD
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.