Sika Sikaflex 117 Metal Force 290ml – Box of 12
£281.03 inc. VAT
£234.19 ex. VAT
- Product ID: 649763
- Suitable For: bonding different metals & construction components
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 290ml
- Container Type: cartridge
- Type: adhesive
- Colour: light grey
- Brand: Sika
- Manufactuer: Sika
- Box Size: 12
Sika Sikaflex 117 Metal Force is a 1-part construction adhesive especially formulated for bonding metals.
KET FEATURES
Good adhesion to many metals and alloys such as copper, brass and bronze. Saving time and money without the need for a primer.
Very good workability making it easier to use.
Very high stability and weatherability on metals including copper, ensuring a durable product.
Very low emissions keeping the user safe.
Low extrusion force needed making it easier and quicker to use.
Shelf Life: 12 months from the date of production. The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
For all other Sika products on our website, please click here.
Any further information you may need on Sika products, please visit their website here.
Sikaflex -117 Metal Force is An adhesive to bond different metals and construction components such as:▪ Copper
▪ Brass
▪ Bronze
▪ Anodised aluminium
▪ Hot dipped galvanized and electrolytic galvanized steel
▪ Corrugated iron and metal sheets
▪ Metal facades and metal cladding
▪ Metal roof elements, cover plates and coverings
▪ Sky lights
An adhesive to bond most construction materials such as:
▪ Metals
▪ Concrete
▪ Masonry
▪ Most stones
▪ Ceramic
▪ Wood
▪ Glass
For interior and exterior use
APPLICATION
Substrate Preparation
The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which
could affect adhesion of the adhesive.
Sikaflex-117 Metal Force adheres without primers and/or activators. However, for optimum adhesion and critical, high performance applications the following priming and/or pre-treatment procedures must be followed:
Non-Porous Substrates
Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. Clean and pre-treat using Sika Aktivator-205 applied with a clean cloth. Before bonding, allow a waiting time of > 15 minutes (< 6 hours).
Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. After a waiting time of > 15 minutes (< 6 hours). Apply Sika® Primer-3 N applied by brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding.
PVC has to be cleaned and pre-treated using Sika Primer-215 applied with a brush. Allow a waiting time of > 15 minutes (< 8 hours) before bonding.
Porous Substrates
Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika Primer-3 N applied by brush. Before bonding, allow a waiting time of > 30 minutes (< 8 hours).
For more detailed advice and instructions contact Sika Technical Services.
Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Primers also improve the long-term adhesion performance of a bond.
APPLICATION METHOD / TOOLS
Bonding Procedure
After the necessary substrate preparation, cut the top of the cartridge before or after inserting into the sealant gun. Then cut the nozzle for the desired bead size and fit the nozzle onto the cartridge.
Apply in beads, strips or spots at intervals of a few centimetres each. Use hand pressure only to fix the components to be bonded into position before skinning of the adhesive occurs. Incorrectly positioned components can easily be unbonded and repositioned during the first few minutes after application. If necessary, use temporary adhesive tapes, wedges, or supports to hold the assembled components together during the initial curing time.
Fresh, uncured adhesive remaining on the surface must be removed immediately. Final strength will be reached after complete curing of Sikaflex-117 Metal Force, i.e. after 24 to 48 hours at +23 °C, depending on the environmental conditions and adhesive layer thickness.
LIMITATIONS
▪ For optimum workability, the recommended adhesive temperature is +20 °C.
▪ Application during high temperature changes is not recommended (movement during the curing).
▪ Before bonding, check adhesion and compatibility of paints and coatings by carrying out preliminary trials.
▪ Sikaflex -117 Metal Force can be overpainted with most conventional water-based coating and paint systems. However, they must first be tested to ensure compatibility by carrying out preliminary trials. The best over-painting results are obtained when the adhesive is allowed to fully cure. Note that non-flexible paint systems may impair the elasticity of the adhesive and lead to cracking of the paint film.
▪ Colour variations may occur due to exposure to chemicals, high temperatures and/or UV-radiation (especially with the colour shade white). However, a change in colour is purely of aesthetic nature and does not adversely influence the technical performance or durability of the product.
▪ Always use Sikaflex -117 Metal Force in conjunction with mechanical fixings for overhead applications or heavy items.
▪ For very heavy items provide temporary support until Sikaflex -117 Metal Force has fully cured.
▪ Full surface applications / fixings are not recommended since the inner part of the adhesive layer may never cure.
▪ Before using on reconstituted, cast or natural stone, contact Sika Technical Services.
▪ Do not use on bituminous substrates, natural rubber, EPDM rubber or on any building materials which might leach oils, plasticisers or solvents that could degrade the adhesive.
▪ Do not use on polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE / Teflon), and certain plasticised synthetic materials. Preliminary trials are
recommended or contact Sika Technical Services.
▪ Do not use for glass bonding if the bond line is exposed to sunlight.
▪ Do not use for structural bonding.
▪ Do not expose uncured Sikaflex -117 Metal Force to alcohol containing products as this may interfere with the curing reaction.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.