Sika Sikasil Pool 300ml
- Suitable For: Joints in and around frequently wet areas between tiles, concrete, glass and metals.
- Area of use: INT & EXT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 300ml
- Container Type: cartridge
- Type: sealant
- Colour: 2 colours
- Brand: Sika
- Manufactuer: Sika
Sika Sikasil Pool is a one-component, neutral cure silicone, specifically designed for use in swimming pools and continuously wet areas.
CHARACTERISTICS / ADVANTAGES
– Excellent water resistance
– High chlorine resistance
– Excellent resistance to fungal attack
– Non-corrosive
– High elasticity and flexibility
For an application gun, please click here. for an alternative marine sealant, please try CT1.
For all other Sika products on our website, please click here.
Any further information you may need on sika’s products, please visit their website here.
Sika Sikasil Pool is a sealant designed for joints in and around frequently wet areas between tiles, concrete, glass and metals. However, different prep work may apply.
SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikasil Pool adheres without primers and/or activators.
However, for optimum adhesion and critical, high-performance applications, such as on multi-story buildings, highly stressed joints, extreme weather exposure or water immersion, the following priming and/or pretreatment procedures shall be followed:
Other metals, such as copper, brass and titanium-zinc
These also have to be cleaned and treated using Sika Aktivator-205, wiped on with a clean towel. After the necessary flash-off time, use a brush to apply Sika Primer-3 N and allow a further flash-off time of at least 30 minutes to 8 hours before sealing the joints. Also, when using on PVC, it has to be cleaned and pre-treated using Sika Primer-215.
Porous substrates
For instance, areas such as concrete, aerated concrete and cement-based renders, mortars and bricks shall be primed using Sika Primer-3 N applied with a brush. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours).
For more detailed advice and instructions, please contact the local Sika Technical Services Department.
APPLICATION METHOD / TOOLS
After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if needed. After that, insert the cartridge into the sealant gun and extrude Sikasil Pool into the joint. Make sure that it comes into full contact with all sides of the joint and avoids any air entrapment.
To ensure adequate adhesion, make sure Sika Pool is tooled firmly after extruding product into the joint. It is recommended to use masking tape where exact joint lines or neat lines are required. Remove the tape within the skin time. Use a compatible tooling agent to help smooth the joint surfaces.
7 reviews for Sika Sikasil Pool 300ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £9.79 inc. VAT
£8.16 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £16.80 inc. VAT
£14.00 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Anonymous (verified owner) –
This product is fantastic. We have used it for pool, bathroom and kitchen. Will not entertain any other.
Unfortunately when it arrived the packing was split open but three tubes were okay.
philip wraight (verified owner) –
Great service
Mr. R. (verified owner) –
Great service
Pauline Harris (verified owner) –
Great Price, excellent product & quickly delivered.
Dale (verified owner) –
Good product at a sensible price
craig (verified owner) –
Richard P. (verified owner) –
All good and as described. Of course, this is not a cheap product and a 150ml version should be available for smaller jobs and repairs.