- Suitable For: use in all traditional sanitary sealing applications instead of sealants
- Area of use: INT
- Time to full cure: instant
- Volume: 22mm x 3.35m 38mm x 3.35m
- Type: sealant
- Colour: white
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 1
Data Sheets
Soudal Sealing Strips are a self adhesive sealing strip for the watertight sealing of baths, showers and sinks. The easy to use strips adhere to most sanitary materials, are quick to apply and are a great alternative to traditional sealants.
Properties
– Watertight
– Easy to apply
– Very good adhesion on almost all substrates.
– Tear resistant
– Colourfast
– No drying time, continue working immediately
– Solvent free
Substrates
Substrates: The most common substrates in bathrooms and kitchens: bath, shower tray, wash-basin, sink, floor and tiles. Not suitable for PE, PP, PTFE and bitumen
Nature: rigid, clean, dry, free of dust and grease. Ensure that frost or condensation are absent on the surface.
Surface preparation: Carefully degrease the surface with Soudal Surface Cleaner or acetone (the latter is not suitable for plastics). A preliminary adhesion test on every surface is recommended.
For more in our range of bathroom sealants, please click here, or to shop our range of Soudal products, please click here.
Alternatively, you can visit Soudal’s website here.
Sealing Strips are ideal for use in all traditional sanitary sealing applications instead of sanitary sealants (i.e. baths to wall tiles). Can be used to seal around showers, kitchen worktops, toilets, etc. Resistant to prolonged contact with water. Including:
– Waterproof sealing of joints along bath, shower tray, wash-basin, countertop, sink, floor and tiles.
– As an alternative to traditional sealants.
– Only for interior use
APPLICATION
Application method: Cut the Sanitary Sealing Strip to size and take 1 cm extra as a margin. If the strip is a bit stiff, it can be softened by gently warming it up on the radiator or using a hair dryer. Fold the strip in half over its entire length and remove a small section of the release liner. Apply the strip to the corner of the longest joint and press firmly.
Remove the remaining release liner and continue to press firmly and evenly without stretching the strip. Cut off the excess strip at the end of the joint. Adhere the strips in the corners over one another, then cut the overlapping parts in a 45° angle, remove the loose pieces and press the corner firmly again. To obtain a better adhesion you can heat the strip with a hairdryer for 10 sec. immediately after application.
Check if the Sanitary Sealing Strip adheres well everywhere (especially in tile joints) and wait 24 hours before using the sanitary ware.
Cleaning: Adhesive residues can be removed with Soudal Adhesive Remover-CT or Soudal Surface Cleaner.
Repair: With the same material.
LIMITATIONS
– Not suitable for expansion and dilatation joints.
– The applied pressure and not the duration of the compression will determine the ultimate strength of the bond.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.