Bond It LevelMaster Standard Self-Levelling Compound
- Suitable For: levelling floors
- Area of use: INT
- Application Method: trowel
- Time to full cure: 4 hours
- Volume: 10kg, 20kg
- Container Type: bag
- Type: self levelling copmound
- Colour: grey
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
This chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface should be trowelled or floated to create a smooth finish. This compound can be built up in thin layers of 10-12mm, allowing each layer to fully cure before the next is applied.
Key Points:
- Chloride-free and water-based: Ideal for internal floor use.
- Fast-setting: Sets within 2-3.5 hours, with floor coverings applied after 6-8 hours.
- Pre-blended and economical: Requires only the addition of water for ease of use.
- Self-smoothing: Can be applied up to 6mm thickness, with a feathered edge for a smooth finish.
Shelf Life: 12 months from the date of manufacture, before the date shown on the bag, when stored in unopened sacks.
Storage Conditions: Store in unopened, original bags in a dry, temperature-controlled environment, away from extremes of temperature and draughts. Keep clear of the ground at temperatures between +5°C and +30°C. Reseal part-used bags to maintain quality.
Coverage: Coverage depends on the condition of the subfloor, but a 20kg bag will cover approximately 3.6m² at a 3mm depth.
For more in our range of compounds, please click here. For our full range of Bond It products, click here.
Alternatively, you can visit the Bond It website here.
LevelMaster STANDARD is an ideal underlay for levelling most common internal subfloors before installing floor coverings. It is not suitable for use with underfloor heating systems or areas subject to limited movement or vibration, unless used with LevelMaster LATEX LIQUID. For these conditions, LevelMaster AD-FLOOR, LevelMaster AD-FLOOR PLUS, or LevelMaster FIBRE PLUS should be used instead. This product is not designed as a final wearing course and must be covered with tiles, lino, vinyl, carpet, or similar flooring materials.
Limitations
Do not use at temperatures below +5°C or above +30°C. High temperatures will reduce open time, while cold or humid conditions will slow drying. LevelMaster STANDARD is not suitable as a final wearing surface and must be covered with floor coverings such as ceramic tiles, wood flooring, or carpet. It is not compatible with underfloor heating systems. Only mix as much material as can be used within 10 minutes.
Preparation
Surfaces must be clean, dry, structurally sound, and free from contaminants like grease, oil, paint, or polish. Damp down porous surfaces without causing pooling. Very absorbent surfaces should be primed with a waterproof primer like Bond It PRIMER & FLEXIBLE ADMIX or SBR. Wooden floors should be overboarded with 15mm exterior-grade plywood, fixed with screws at 300mm centers, and primed. Anhydrite or calcium sulfate screeds should be sanded, vacuumed, and primed with Bond It PRIMER AND FLEXIBLE ADMIXTURE, then left to dry for 24 hours. PVA is not suitable for priming.
Mixing
For each 20kg bag of LevelMaster STANDARD, use 3.6L of clean water. Slowly add the powder to the water while stirring with a slow-speed drill or paddle. Refer to the LATEX LIQUID bottle for dosage instructions if using.
Application
Pour the mixture onto the subfloor within 10 minutes of mixing, applying up to 6mm thickness. Use a flooring trowel or float to create a smooth surface. The product can be built up to 10-12mm in thin layers, allowing each layer to fully cure before adding the next. Ensure proper ventilation during curing. LevelMaster STANDARD accepts light foot traffic after 4 hours, but floor coverings should not be laid for 24 hours (longer if using LATEX LIQUID).
Cleaning
Clean tools and equipment with water. Cured material can only be removed by mechanical means.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.